Search results

may wanna look at the fuel pressure regulator too if TBI and clean the TBI good with carb cleaner idk, thats one i havent seen before

what kind of plugs are you running? bosch plugs are CRAP!! esp the platinum 4s and any plug like them!! is your air filter clean? and idk about the thermostat doing it, but anything is possible. and OBD1 isnt very good when it comes to trying to find codes, if it were OBD2 then you could...

Im not a fan of flat paints either, however i do like your idea, sounds pretty original, and im always a fan of that! i painted my jeep metallic black with metallic yellow scallops but then shortly after i stgarted seeing quite a few jeeps with the same style of paint job driving around here...

i bought the cam in a kit, timing chain, springs, lifters, etc, but the springs were to big to sitg on my seats, the cam kit is actually for the 4.2L 258 and not the 4.0L 242, i have not seen a cam actually for the 4.0L, and all of the springs i have found at summit online or mopar performance...

go behind the glove box, there is a fuse block there for your nuetral safety circuit, pull the fuse for the circuit, this will allow you to start the jeep without the clutch being disengaged, also check the IGN fuses under the hood, and you can also take a screw driver and cross the solenoid and...

tire size and torque/horsepower specs in your drivetrain wil all dicate your choice of gears as a whole! you have to know your power range and power rpm range, as well as what you are wanting to use the vehicle for. if you want to crawl you will want MUCH steeper gears, but as a daily driver...

should be pretty normal, jeeps are not known for getting good gas mileage! lol and most cars give you 40+ miles afte the light comes on.

what size tires are you running and what transmission? also you have to change the gear in your t-case for the speedo to match your tire size as well as gears, Quadratec has 2 styles available, some t-case have long shaft gears and some have short shaft gears. i have a 94 4.0 (quite hopped up)...

decided to clean up and paint the knuckle while replacing the axle seal

PUTTING NEW OUTER AXLE SEAL IN PASS SIDE

PUTTING NEW OUTER AXLE SEAL IN PASS SIDE

PUTTING NEW OUTER AXLE SEAL IN PASS SIDE

I LOVE MY DELTA HEADLIGHT UPGRADES!!!!