Search results

X2= He agrees with the above post..........

I would check for: correct fluid level, get underneth and look at the linkage movement and engagement during shifting to see if there is any sloppy movement (engine off someone shift while the other looks).

Welcome and congrats on your Jeep! Your in the right place you will get great advise from these guys,..... First off how often do you drive it and where(what kinda terrain) if its your DD (daily driver) becareful how you set it up, it will efffect the ride and handling of the jeep, what kind of...

Check the lead(wire) coming off the sensor for good connection check the wire for its condition and not broken/cracked. If still reading funny change the sensor. Go from there.

I had a gromet go out on my 97 (where shift rod goes into shift lever on transfer case) the light was intermitent, next day shifed into 4H and felt a little weird went to a sand pit pulled into 4L and the rod fell out of the shft lever! Now I was neutral, got underneth the jeep and had to...

Get the same size, ask them how they measure it!

Once you reassymble everything, fill the radiator with your coolant/water mixture (50/50 here in FL), start the engine let it Idle keep filling it till its full, when the thermostat opens you will see water movement in the radiator quickly top it off and put the radiator cap on put some of your...

A million screw$ ! I am with ya!

I remember when Mom told me to keep a dime in my pocket for that emergency phone booth call! How times have changed can't find phone booth or a big blue mailbox hardly anywhere........or dimes for that matter.

Well story is, charged it, leaked down in 24hrs., dealer vac, dye, charged it, leaked down in 24hrs.(dye@evap) charged it w/ 8oz. super stop and 12 oz.134, leaked down in 24 hrs. I looked at the manual and a 97 is a 4-5 hr job (me probably 10hrs) Dealer est. $700.00/$800.00 that includes the...

+ hoses & hose clamps, Go all the way! Get It Right.:shades:

If it has a carburator I would suspect the floats are causing the problem if the fuel system has good pressure and flow. What knd of carb does it have?

Try to use a small mirror and a light, run the engine till you see water dripping. Turn off engine and have a look around you should see a small "weep" hole on the bottom of the pump if theres water at the hole the pumps going bad. ... could be the lower hose connection at the pump, you really...

I live in Florida 50/50 is a must.

Flush the system (blockage), get a new water pump, But first I would take the thermostat out and run it and see if that even makes a differance!

Thanks Steel, In your diagram info: "The wiper pivots are fastened to the ends of the module bracket.":cry: Fastened what they should say is "pressed in to" but fastened will do, and yes you must buy the assembly to get those parts. :shades: Soooo.... I re-fastened them together with a mig...

1997 TJ Wrangler Sport 4.0 I and the dealer ASSUME that the slop is from a broken/worn out bushing/gromet, its the passenger wiper and has about an inch or so of freeplay/sloppy movement wiper works fine just sloppy. No play on the actual linkage arms just at the base of the spline shaft...

I know guys about waiting and checking the level with the engine off, I did that and checked it while the engine was running just to see the change,........ Bounty, I would like to try the larger filter, have you tried one and where did you get it? Thanks

Did it..... almost right....pulled dipstick while running at idle perfect.

I bought the 97TJ with 4.0L and notice the oil level was a little high 1/4"to maybe 3/8" above the full mark, I changed the oil and added the six quarts w/filter (All the filters I looked at were the same size no matter who made them) and the level was the same, a little high. Everything is...