Search results

Check this out. Never look down on anyone unless you are helping them up - Jesse Jackson

Sorry I don’t think I could find it. It came up when mindlessly scrolling. Never look down on anyone unless you are helping them up - Jesse Jackson

Not to freek you out…. But! https://youtube.com/shorts/Uzy_U[emoji637]D[emoji[emoji6[emoji640][emoji638]][emoji640][emoji6[emoji640][emoji638]]][emoji639]m[emoji[emoji6[emoji640][emoji638]][emoji640][emoji640]]?si=W_MKwfXfxxncjBIz Never look down on anyone unless you are helping them up -...

The axels still turn the pinion with the rear drive shaft pulled. There is no force driving or slowing the pinion without the drive shaft. The movement in the video is both rotational and in and out. Does it move in and out without twist/rotation. Does it move up and down or left right without...

Basic video on torque converter https://youtube.com/shorts/UTVUrETde3E?si=jAsZQpIRdaiybdGU https://youtube.com/shorts/S3lHnZQvtIg?si=sr4tiPpIy-_XEvkh Never look down on anyone unless you are helping them up - Jesse Jackson

Make sure it has a paper gasket on the tip. That sets the spacing from the flywheel. Without it you may crack or destroy it on the first turn. Never look down on anyone unless you are helping them up - Jesse Jackson

Look at the wires going into the back of the plug to be sure none are backing out. The CrC. QD Contact Cleaner. Disconnect the battery and clear the code. Check the battery is fully charged. Mine sits too long and the battery slowly drains. Never look down on anyone unless you are helping...

Two battery terminal fixes. These may help. https://youtube.com/shorts/nsos-NbQYLw?si=_fZmTskkY7nOioAF https://youtube.com/shorts/xo5oh_XbIQc?si=hUg2FeMNEZWpjIdF Never look down on anyone unless you are helping them up - Jesse Jackson

Here is what feels like https://youtube.com/shorts/uUThBWKEhd8?si=i_XR5kcEe0RifBnC Never look down on anyone unless you are helping them up - Jesse Jackson

Just something to consider should you use the shackles to tow or pull someone out. Strength of the anchor point. Never look down on anyone unless you are helping them up - Jesse Jackson

Looks nice. Do the shackles line up with the frame? Never look down on anyone unless you are helping them up - Jesse Jackson

Saw this today and thought it is worth sharing. https://youtube.com/shorts/K80XNmcFPHE?si=H5-BlwHIWu1OnKVk Never look down on anyone unless you are helping them up - Jesse Jackson

Consider the low profile trans mount to help offset drivetrain angles with the lift. Never look down on anyone unless you are helping them up - Jesse Jackson

Did you get a chance to look into this? Never look down on anyone unless you are helping them up - Jesse Jackson

How a torque coverter works https://youtube.com/shorts/mvd9m4yHIOI?si=2NIn4cWK7vwTCIkd Here is a good explanation https://youtu.be/z6vlsTcyFS0?si=W237kjt9RewLBvmF Hold speed and watch rpm. If rpms jump the converter is failing. Never look down on anyone unless you are helping them up -...

What fluid did you use?? https://www.jkowners.com/threads/42rle-blown-after-trans-service.377690/ https://www.jkowners.com/threads/42rle-blown-after-trans-service.377690/ Never look down on anyone unless you are helping them up - Jesse Jackson

Careful trusting AI on web information. There is so much poor information the mass of like information is reported. It’s like finding a good mechanic. They will be straight with you and not try to soak you. Never look down on anyone unless you are helping them up - Jesse Jackson

I learned with water pumps to wait for the dry time. You could swap a gasket out fairly quickly. Then reassembled in almost no time. Only towatch it leak within 5 minutes, if you don’t let it dry . The reason for can seems the opposite of what you would expect. I wouldn’t think things in a can...

Best simple video explaining s differential https://youtube.com/shorts/IS6U2laa1zE?si=Jcng5U124j3a6Vgs Never look down on anyone unless you are helping them up - Jesse Jackson

Do you have the injector heat shields???! No start after heat soak is caused by the missing heat shield under #3. The hot exhaust manifold vaporizes the gas in the line. Until it cools it forms a vapor lock. It could be as easy as tinfoil or buying the kit. Never look down on anyone unless...