Rollbar
New member
My son and I swapped out the old tired points driven AMC 304 & Installed a AMC 360 with electronic ignition.
Our plan is to hook up the wires (we marked locations etc) and then see what we need to do to incorporate the ECM Dist into the system-tap the ECM into the '74's system.
Anyone have an idea or a diagram whereas we can tap in the distributor to the Jeeps system so we can run this thing.
Thanks,
Jim
Here is the build/swap - Jr's '74 CJ5 (304v8), Another Project Soon To Start.
Our plan is to hook up the wires (we marked locations etc) and then see what we need to do to incorporate the ECM Dist into the system-tap the ECM into the '74's system.
Anyone have an idea or a diagram whereas we can tap in the distributor to the Jeeps system so we can run this thing.
Thanks,
Jim
Here is the build/swap - Jr's '74 CJ5 (304v8), Another Project Soon To Start.