Motorcraft 2150, kinda need info quick.

[SenorCole86]

Ok, found these two on eBay. Not sure though, that one from the wagoneer looks a lot bigger than that one from the ford. Which one would y'all reccomend. I don't wanna have to mod anything to get it to fit. Here's the links.

http://cgi.ebay.com/ebaymotors/ws/e...ory=6759&item=7949259543&rd=1&ssPageName=WDVW

http://cgi.ebay.com/ebaymotors/ws/e...ry=10076&item=4521437359&rd=1&ssPageName=WDVW

Motorcraft offers only carbs for ford, lincoln, and mercury, right? So, which one would fit my Jeep? If not these ones, where might I find a new one?

 

[derff96963]

Hardtop/Full Doors/Sliders for 94YJ and other items wanted

The Motorcraf carb is not meant to be used on a jeep but someone at some time tried it and it works very very well. The difference is that the Jeep manifold has the small two barrel bolt pattern. The motorcraft has the wide bolt pattern. You will need an adapter plate but there are only about $20 and the trottle linkage will need modified alittle bit its not real hard and trust me its a good carb. You want to get the smaller size, I beleive mine is the 1.08 venturi size. There are several good sites people have made explaining how to do everthing but I don't have any links right now. Someone around here should or you could do a search yourself.

 

[SenorCole86]

RE: Chat room Sunday at 9:00 est

Alright, good deal, thanks a lot. I found the carb you are talking about and am gonna buy it. I also found the adapter on the advance auto parts website. Someone directed me to the Mr. Gasket adapter. Thanks again for your help.