p0523

[draco212sti]

So my 2012 jk 3.6l is throwing P0523 code and I have changed out the oil pressure Sensor with a OEM part. Tried to clear the code and it is still throwing the code. Now what? Would a bad CCV valve have anything to do with it?


Sent from my iPhone using Jeepz.com mobile app

 

[mark sr]

It could be a fault in the wiring to the sensor.

 

[JPNinPA]

Is your battery in good condition?
Do you have good clean ground connections?
Bad battery or connections cause faulty codes.

What weight oil do you use?

Change it regularly?

Bad sensor or wiring?
Did you use OEM sensor



Sent from my iPhone using Jeepz.com mobile app

 

[draco212sti]

-Yes I used OEM
-I’ll check the battery
-I’m sure it’s not the sensor as I have placed 2 different ones in there just to makes sure that it was not a bad one.
-Oil is fine I change it every 3k.
So I’m leaning towards wiring. Just wanted to know if there was anything else I might be missing.



Sent from my iPhone using Jeepz.com mobile app

 

[JPNinPA]

So what weight oil do you use?


Sent from my iPhone using Jeepz.com mobile app

 

[draco212sti]

5 30 synthetic


Sent from my iPhone using Jeepz.com mobile app

 

[JPNinPA]

Yah Id look at the wiring or checking the pathway to the sending unit for buildup or sludge.


Sent from my iPhone using Jeepz.com mobile app