Starter issue???

[acessna1]

Just replaced the battery and alternator in my 86 CJ7. When I turn the key I hear a click and then nothing. I've checked and rechecked all the connections. So do I go ahead and replace the starter and if so do I replace the starter solenoid while I'm at it. Thank you in advance for any help

Sent from my iPhone using Jeepz

 

[jimjulie1]

Normally a clicking sound when you try to start your Jeep is a indication that the solenoid is stuck and needs replacing. It Is a simple job and one can be purchased at your local auto parts store for normally less than $ 20.00

 

[acessna1]

What if I tried going across the solenoid? I was told before that it should start if I did that. I tried it and still nothing. I guess I'm going to start by replacing it and hopefully it works. Thank you very much for your help

Sent from my iPhone using Jeepz

 

[jimbob2001]

You COULD have a. Stuck Starter Solenoid -- OR there might be an Issue with the Starter. You can TRY replacing the Solenoid -- as a FIRST thing to try. If it Fixes it-Great! If not, Back to the drawing board (starter?). How many miles on your Engine? Which. Motor do you have IN. Your Jeep?? JB

 

[superj]

how much voltage is your battery reading?

 

[ubee]

test the starte on the bench or on the ground with a set of jumper cables. If it works under those conditions it should work in the car if the battery is strong.

 

[69jeepcj]

If the solenoid isn't it, crawl under the jeep and see if the bendix gear is sticking on the starter. It shouldnt be engaged to the flywheel, if it is take a screw driver and pry it back then try to start. If it starts get a starter.