Checking for a parasitic drain

The battery you borrowed. What size is it? Was it charged? And what is the CCA rating on the battery?

Charged does not just mean it reads 12.6V . It means it reaches its CCS rating under load or at least 97% of it.



Never look down on anyone unless you are helping them up - Jesse Jackson
First I state the battery tested at 12.43 volts. What its CCS is, is not relevant to run a test.
 

First, if you click on one of the images it opens and you enlarge the image by spinning the wheel on your mouse and move around the image by left-clicking and drag.

You are the one who told me to set the meter where it is so here is an idea none of the people talking think of download the image of the meter open it in paint you can resize it and put arrows where you want the meter set, WOW reality what a concept?
 
I pulled the starter this morning to ship back to Amazon and ran a continuity test with my meter on the solenoid it failed no beep. I made a video of and tried to post it here but the site will not let me.
 
First, if you click on one of the images it opens and you enlarge the image by spinning the wheel on your mouse and move around the image by left-clicking and drag.

You are the one who told me to set the meter where it is so here is an idea none of the people talking think of download the image of the meter open it in paint you can resize it and put arrows where you want the meter set, WOW reality what a concept?

Good Luck!



Never look down on anyone unless you are helping them up - Jesse Jackson
 
Back
Top