Do I have a bad torque converter?

[superj]

And a longer flatt screw driver against the driver side bellhousing and ypu cam put the tip in the flywheel teeth to rotate the engine over and get the 4 bolts holding the torque converter to the flywheel.


Ours is done. Jarrod took the jeep for a few test drives and after we changed the fluid once it was installed and it rauns great so he took it home. I have the 97 blue tj now

 

[superj]

We found out that our 03 is a january build so we must have earlier lines than the later 03 this trans came from. The output shaft on the trans didnt come out on this new trans, where it came out on ours. And the cooler lines used different fittings on this trans. Last, of course, the exhaust mount used metric bolts from the bottom up instead of the standard bolts our original trans had