Getting wiring away from right Header

[Turbogus]

Hi Gang, I was running on about the no start on my Jeep but this may call for another thread.
I have all of my ground wiring running right next to the dual battery tray along with control wiring for the dual Radiator cooling fans and other. I once suspended all this wiring with zip ties to the firewall to grille support rod but it really looked funky. Now that I have 'Black Betty' running again I'd like to retain this wiring in a more professional fashion. My latest idea is to bend up some wire coat hangers and secure it to either the inner fender well of that same support rod.
I'm asking if anyone has a better idea than I to accomplish this. Thank and a lift of the lynch lid for your responses.

 

[superj]

Not i

 

[TerryMason]

Are you looking for some sort of structure to attach it to (hence the coat hanger)?

I don't know how well they'd hold, but you could try something like this

https://www.amazon.com/Adhesive-Management-Adjustable-Organizer-Fixation/dp/B0881DWXPL/?th=1

or this one accepts zip ties

https://www.amazon.com/Cable-Mounts-Adhesive-Organizer-Holders/dp/B08T189Y5J

Wire coat hanger isn't a bad idea if it's inside of a wire loom, and there are no sharp edges.

 

[Turbogus]

WOW! Thanks Terry, I have great faith in 3M adhesives and being rated to 185* if I can keep them high on the inner fender this may do the trick! Thank you kind Sir!

 

[Turbogus]

WOW! Thanks Terry, I have great faith in 3M adhesives and being rated to 185* if I can keep them high on the inner fender this may do the trick! Thank you kind Sir!