whit is this tool called??

[sweetpeet]

this tool skrews on to the intake manifold so that you can hook on to it and lift the engine out. what is this part called and where can I find it??

 

[xt master]

In the past I have used a bolt,washer,and a chain.All found at your local hardware store.

 

[SteelHeadz]

I beleive the technical name for it is a "Hoist anchors". You can find them at your local automotive parts house in different configurations. Some with chains already attached to them and some with an adjustable load equalizer bar.

 

[jps4jeep]

obviously it's not a dictionary

 

[jps4jeep]

oh, and what you are trying to explain has a couple names;
carb plate, lift plate, engine lift plate.

 

[54cj3b]

if your asking about this thing above its a anchor mount that bolts up to the intake manifold
easy to make a home made one also if you have welding experience

 

[Weylyn]

grade 8 bolts and washers 3 foot chain, 10 bucks at ace hardware

 

[buckshot500]

I trust a chain that's bolted to at least the steel head, before I trust a few 5/16" studs that are screwed into aluminum. I know these things are used by many folks, but V8's are heavy.